CP-200 Radio to TW-47
Please Note: This pin-out solution has been designed by a Clear-Com Applications Engineer for a specific customer. It is important to research your specific radio set up and not assume that this solution will work for your installation. Please contact Clear-Com support for additional information.
Radio Manufacturer:
Otto
Radio Model Number:
CP-200
Clear-Com Product:
TW-47.
Diagrams and Photos of Pin-Outs:
Wire as follows:
DB-9
Pin-1 to 3.5mm sleeve
Pin-6 to 3.5mm tip
Pin-5 to 2.5mm sleeve
Pin-4 to 2.5mm tip
Pin-7 straps to Pin-8
This is the same as the TW-47 manual shows for Example #2 “Relay in series with microphone”
Version | Date | Comment |
---|---|---|
Current Version (v. 2) | May 03, 2021 16:23 | SookFong Lau |
v. 1 | Apr 27, 2020 16:26 | Justin Emge |
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.