Use a partyline to communicate to all camera operators simultaneously.
To create a partyline between CCU interfaces in Eclipse HX, simply create a new Partyline, add all associated interfaces for the CCUs from the Available Members pane below, and apply the map.
-You can now assign that partyline to panels for communications with ALL camera ops.
**You may also wish to add each CCU to an existing partyline instead of creating a new partyline. Simply select the Partyline, add desired interfaces for the CCUs from the Available Members pane below, and apply the map.
2 Channel Configuration Tip: Example 1
Channel A: use this channel for point-to-point or direct communications to each camera op. This allows any panel to talk directly to each camera operator separately. This channel will NOT be a member of any partyline.
Channel B: use this channel for a production partyline (or similar) when Channel A is being used for point-to-point comms. This allows any panel to talk to ALL camera ops simultaneously.
2 Channel Configuration Tip: Example 2
Channel A: use this channel for a production partyline. Either create a new partyline or add all associated CCU interfaces to an existing partyline.
Channel B: create a new partyline with ONLY the camera CCU Channel B interfaces to allow camera ops to talk among themselves.