Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

To connect 4W (4-wire) between a FSII-BASE-II & RTS Matrix XCP-RJ11/12/RJ45 Breakout Panel 4W, you need to switch your selected 4W Port Function on the FSII-BASE-II to: TO PANEL

Attached is an excerpt from the FSII-BASE-II User Guide (ref 399G169D.pdf; page 106):

Pinout for various Port Function as shown on the Left.

  • How to set Port Function on CCM?

  • How to set Port Function on Front Panel?

Here you can find the various pinout diagrams for the RTS Digital Matrix’s XCP-40-RJ11(RJ12) & XCP-48-RJ45 breakout panels (full pdf attached below):

Additional Technical Details

RTS XCP-40-RJ11:

RTS XCP-48-RJ45:

FSII-BASE-II User Guide: https://clearcom.com/DownloadCenter/manuals/FreeSpeakII_BaseII_v1.5/FSII-BASE-II_User_Guide-399G169D.pdf

  • No labels

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.