Other: What is the pinout for the CC-95 and the CC-260 Clear-Com Headsets?
Attached is the pinout for the cc-95 and cc-260
Note that this diagram is for the cc-95 (single-muff version) and the cc-260 (the double-muff version) so be sure to remember to look at the part of the diagram, which shows the info you're needing.
Note that the 6-pin document is meant for older 6 pin intercom headsets. For using the headsets for use with a 6-pin connector on an AB-100 or AB-120 announcer box, see the AB-1xx manual for that pinout.
Note that this diagram is for the cc-95 (single-muff version) and the cc-260 (the double-muff version) so be sure to remember to look at the part of the diagram, which shows the info you're needing.
Note that the 6-pin document is meant for older 6 pin intercom headsets. For using the headsets for use with a 6-pin connector on an AB-100 or AB-120 announcer box, see the AB-1xx manual for that pinout.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.