Wireless: Can I use RS703 directly with FSII-BASE-II?

Owned by Administrator
Last updated: Jun 13, 2023 by ernie addow
1 min read

Question: Do I need to use a TWC-701 when connecting RS703 belt pack to FSII-BASE-II? I am only using FSII-BASE-II and RS703 belt pack. No other Encore equipment in the system.

Answer: No you don't need a TWC-701. As long as you don't need to interface the RS703 belt pack to an Encore power supply,

You can run the RS703 belt pack in RTS mode (dip switch 8 set to on) and use both channels with one XLR.

You also get call signal on both channels in this mode. Configure as you would an RTS beltpack (see solution Wireless: Can I use RTS BP325 with FSII BASE II?)

You will need to make a Y-split cable: (FSII Base II) 2x XLR to 1x XLR (RS703)

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.