Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Make sure the following is done:

  • In the frame, the channels going to an LQ should be configured as LQ-SIP

  • The LQ sip accounts are registered to the sip server

  • In the LQ sip, the LQ sip accounts and LQ-sip channels going to the frame are assigned as “Directs”. This creates a one-to-one relationship

To call out from a panel:

  • Dial 1 plus the number.

  • Select the sip interface.

  • No labels

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.