A customer wants to power a FS II Base II using a set of batteries and is asking if the base will power OK with said batteries. The spec for the base II DC power supply is 12VDC.
Specs for the battery made by Blueshape (Model BV190HD):
Nominal Voltage: 14.8VOperating Voltage range: 10.8 ~ 16.8 VDCNominal Capacity: 13.2AhNominal Energy: 190WhMax Continuous Discharge: 12AMax D_TAP combined output: -20 ~ +60 Degrees C
Answer from Engineering:
The answer is NO, you can’t usethis battery to power FSII Base directly. Reason for that: OLED Displays whichgetting power directly from external Power supply have absolute maximum voltage15V. Our specified Power supply(453G032-2) has 12V +- 0.5%. There are many ways to makethis battery work with our Base – regulate battery voltage down to 12V, but Itshould be done outside the Base Station.
***Clear-Com does not condone this activity and will not take responsibility for any damage done to a Base.
Specs for the battery made by Blueshape (Model BV190HD):
Nominal Voltage: 14.8VOperating Voltage range: 10.8 ~ 16.8 VDCNominal Capacity: 13.2AhNominal Energy: 190WhMax Continuous Discharge: 12AMax D_TAP combined output: -20 ~ +60 Degrees C
Answer from Engineering:
The answer is NO, you can’t usethis battery to power FSII Base directly. Reason for that: OLED Displays whichgetting power directly from external Power supply have absolute maximum voltage15V. Our specified Power supply(453G032-2) has 12V +- 0.5%. There are many ways to makethis battery work with our Base – regulate battery voltage down to 12V, but Itshould be done outside the Base Station.
***Clear-Com does not condone this activity and will not take responsibility for any damage done to a Base.