Question: Matrix: What default TCP/IP ports doesEclipse does Eclipse EHX use?
From EHX V7.0 to V9.1 (current) Solution
Solution: Default TCP/IP ports used by the Eclipsesystem Eclipse system are:
Port 6001 for IP Panel communications,
Port 42001 for ECS communicationsand communications and
1300 for the matrix eventlogevent log. Ports 42001 and 1300 are used by the UDP/protocol. Eclipse Eclipse system administrators areadvised are advised to check with networkadministrators with network administrators or IT that these default ports may be used without causing a conflict with anyother any other application on the network. The The Eclipse processor card can use astatic a static IP address (recommended) or be configured for DHCP from EHX softwaresystems software systems layout screen. Each Each IVC-32 card requires a staticIP static IP address. It is recommended that theseaddresses that these addresses are issued by IT or the Network Administrator to avoid conflicts with any other systemon system on the network and are not part of the DHCP dynamically assigned range.
Summary
bc == is broadcast data i.e: 192.168.42.255 (directed broadcast packets NOT global broadcast packets which are 255.255.255.255)
dir == directed. (standard point to point TCP/IP packets)
Matrix event log - udp\1300 dir
HCI - tcp\52001 - tcp\52020 inclusive
Map & Firmware download - udp\42003 dir (from 5.2 or later ) - udp\512 dirpreviously dir previously. Latter still used by 5.2 ECS to upgrade old frames.
Rack to Rack comms - udp\42001 bc ,& dir (also used by EHX for matrix discovery and Production Maestro for vox information)
LMC64 - udp\42003 bc
IVC32 - Configurable, defaults to tcp\6001
IP-IVC mode Panel discovery - udp\5000 bc