Alternating The Same Channels on FS Edge System - Can You Use The Same Two Channels Between Transceivers?
As discussed in this solution: https://clear-com.atlassian.net/wiki/spaces/SF/pages/957972488 , you must ensure that transceivers using the same channel can not see each other, otherwise your beltpack won’t roam from one transceiver to the next. This image shows what Site Survey Mode would indicate should your beltpack see the two transceivers that are on the same channel. Note the packet loss.
Short answer is NO, you can not use the same channels between transceivers.
WITH THAT SAID:
Though this has NOT been thoroughly tested by Clear-Com, you in theory can alternate the channels between the two transceivers. As an example, if transceiver 1 is on channels 40-48, but transceiver is on channels 48-40, then this is technically alternating the channel and the Site Survey will show no packet loss.
To reiterate, this has not been tested by Clear-Com and should work in theory! It is highly recommended that you use two of the many other channels available in the 5GHz range.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.