Telephone Interfacing Solutions for Intercom

Owned by Justin Emge

Last updated: Jun 05, 2023 by Dalton

1 min read

Connecting telephone systems to intercom is an age-old requirement which is going through important changes driven by industry evolution. Interfacing POTS telephone lines with your Clear-Com Eclipse-HX system can be done with SIP-enabled LQ systems as well as third-party SIP-to-POTS and analog-to-POTS solutions.

Below please find instructions to configure LQ-SIP with Eclipse as well as information on integrating several third-party solutions. Many of these solutions are also be relevant for our wireless and Partyline intercom solutions as well.

SIP & POTS Solutions:

How To Configure LQ-SIP:

Step by Step instructions for:

SIP FAQ’s:

Other Useful Articles:

SIP: How do I dial out from a V-Panel using a SIP interface?

How do I dial into an Eclipse party line from a phone line?

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.