FS EDGE BASE: How do I program the IP on the Base using the front panel menus?

  1. Press the MENU button.

  2. Using the far-left rotary controller, navigate to Networking.

  3. Select Management.

  4. Navigate to DHCP and select DISABLED. Push to select menu item.

  5. A numerical touchscreen keypad appears in the screen.

  6. Using the touchscreen, press Clr to clear the IP address field.

  7. Enter the new IP address using the touchscreen.

  8. Press OK.

  9. Edit the subnet if required.

  10. Press OK.