Wireless: When does the Auto null on the DX210 need to be done?
Question: Does the Auto null on the DX210 need to be done each time the system is used after powering down, only when disconnected/reconnected to the wired system or only the first time it is used with the wired system?
Answer: Typically the auto null needs to be re-done if there is a major change to the 2wire setup, like adding/ removing wired PL units, changing the way the DX210 is connected to the system or connecting the DX210 to a different PL system. Generally if the auto-null is done once and the system is powered on/off then it does not need to be re-done
The auto null should also be done if you are hearing echo betweenthe wired side and the DX210 base user or wireless users..
Answer: Typically the auto null needs to be re-done if there is a major change to the 2wire setup, like adding/ removing wired PL units, changing the way the DX210 is connected to the system or connecting the DX210 to a different PL system. Generally if the auto-null is done once and the system is powered on/off then it does not need to be re-done
The auto null should also be done if you are hearing echo betweenthe wired side and the DX210 base user or wireless users..
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.