Wireless: Can I connect a TW-47 directly to a Tempest Base Station in Master Mode?
Question: I'm considering using a TW-47 2-way radio interface connected directly to a Tempest 2400 base station 2-wire Party-line connector and running the TW-47 from the base station in Master Mode and triggering the TW-47 from a Tempest beltpack call signal activation. Can I do this?
Answer: The current draw of the TW-47 typically is 40 to 60 mA with a 20 - 30 Vdc voltage input. This should be an acceptable current drain on a single Tempest 2400 base station in master mode (no other items should be connected to the PL connectors at this point). See the drawing below for connections / wiring.
Ensure that the Tempest BP are configured to have the "Call on talk" feature enabled
Answer: The current draw of the TW-47 typically is 40 to 60 mA with a 20 - 30 Vdc voltage input. This should be an acceptable current drain on a single Tempest 2400 base station in master mode (no other items should be connected to the PL connectors at this point). See the drawing below for connections / wiring.
Ensure that the Tempest BP are configured to have the "Call on talk" feature enabled
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.