Wireless: Will a 16 ohm impedance headset work on a WBS series beltpacks?
The answer is NO on using 16 Ohms impedance ear-piece headsets (or I should say NOT recommended).
Will it work for awhile...perhaps, in fact it could be used for the life of the product if the volume of the beltpack is kept low (less than a 1/4 turn up). At high volumes with speech the headset driver circuit output will overheat and will (over time) burn up the output resistors.
We do not wouldn't recommend anything below 32 Ohms on the output of any of our WBS-670, 680 or 682 wireless beltpacks.
Will it work for awhile...perhaps, in fact it could be used for the life of the product if the volume of the beltpack is kept low (less than a 1/4 turn up). At high volumes with speech the headset driver circuit output will overheat and will (over time) burn up the output resistors.
We do not wouldn't recommend anything below 32 Ohms on the output of any of our WBS-670, 680 or 682 wireless beltpacks.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.