Wireless: WBS system troubleshooting
These are some of the common faults customers have reported in the past regarding WBS systems
Common faults to check before sending the unit back for repair. Pack was on the wrong setting… Base on 01A with pack on 01A but # 5 frequency not #1
TX Switch setting on base in wrong position etc
Battery sled not making good contact… works, does not work, works---- intermittent operation
On the two channel, We have found the internal Xmit switch “Off” This can happen if the base takes a good hit (dropped)
“N” type connector on the base (T or R) broken..
Common faults to check before sending the unit back for repair. Pack was on the wrong setting… Base on 01A with pack on 01A but # 5 frequency not #1
TX Switch setting on base in wrong position etc
Battery sled not making good contact… works, does not work, works---- intermittent operation
On the two channel, We have found the internal Xmit switch “Off” This can happen if the base takes a good hit (dropped)
“N” type connector on the base (T or R) broken..
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.