Wireless: WBS-680 Why does the system go into feedback when I activate the talks on BPs?
Question - When I press the talk button on my WTR-680 beltpack or when I talk on the basestation headset jack I get a loud feedback in the headset.
Answer - Set the IC (InterCom) mode switches on the front panel of the basestation to 4-wire mode if no wired Partyline (PL) intercom is plugged into the IC connectors on the rear panel of the WBS-680 basestation. This will prevent the 2-wire IC from oscillating due to no load present.
Answer - Set the IC (InterCom) mode switches on the front panel of the basestation to 4-wire mode if no wired Partyline (PL) intercom is plugged into the IC connectors on the rear panel of the WBS-680 basestation. This will prevent the 2-wire IC from oscillating due to no load present.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.