Wireless: Using the DX410 with an RS703 and TWC701
In the back of the DX410 there is a button to change the XLR connections from a Clear-Com format to a RTS format.
RTS mode also works with Clear-Com RS703 beltpacks. In the RTS mode both channels coming from the RS703 are
then available on the base station via a single 3-pin XLR connection to Channel A or Channel B. Be sure to set the
appropriate channel selection via the front panel controls.
The BP410 beltpacks can select either channel to communicate with but not simultaneously. However the local headset
user on the front of the base station will have the ability to talk to either or both channels simultaneously.
Keywords: TWC-701, TWC-704, party, line, belt, pack, analogue, 2-wire, TW, PL, two, wire
RTS mode also works with Clear-Com RS703 beltpacks. In the RTS mode both channels coming from the RS703 are
then available on the base station via a single 3-pin XLR connection to Channel A or Channel B. Be sure to set the
appropriate channel selection via the front panel controls.
The BP410 beltpacks can select either channel to communicate with but not simultaneously. However the local headset
user on the front of the base station will have the ability to talk to either or both channels simultaneously.
Keywords: TWC-701, TWC-704, party, line, belt, pack, analogue, 2-wire, TW, PL, two, wire
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.