DX-410 - Too Many Buttons
Setup: Have two DX-410 bases that are daisy-chained using the AUX In and AUX Out ports. There is also a Y cable on the Output to an amplified speaker so all audio can be heard on a loudspeaker.
Problem: They are getting confused when pressing buttons on the WH-410 headsets.
Solution: Change both base units to single channel mode and turn off the hands free mode function on Channels A & B, but in turn do hands free mode for the ISO. This forced them to use only the ISO button during operation since they wanted to latch the channel prior to needing them and the ISO would be the only latch capable button on the headset.
Problem: They are getting confused when pressing buttons on the WH-410 headsets.
Solution: Change both base units to single channel mode and turn off the hands free mode function on Channels A & B, but in turn do hands free mode for the ISO. This forced them to use only the ISO button during operation since they wanted to latch the channel prior to needing them and the ISO would be the only latch capable button on the headset.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.