Wireless: Can I use FS-BP as an IFB receiver?
Question: Can I use a FreeSpeak beltpack as an IFB receiver and where do I plug a mono earphone 1/8mm TS connector into the beltpack?
Answer: Yes, you can use the FreeSpeak beltpack (FS-BP) as an IFB receiver. You will need to setup the FSBP as a IFB destination in the configuration. Any person talking to the FSBP will cut/dim the program material being fed to the FSBP unit
For plugging a mono earphone 1/8mm TS connector into the beltpack, you will need: XLR 4-pin Female connector to 1/8" TS jack adaptor cable, see attached picture.
Answer: Yes, you can use the FreeSpeak beltpack (FS-BP) as an IFB receiver. You will need to setup the FSBP as a IFB destination in the configuration. Any person talking to the FSBP will cut/dim the program material being fed to the FSBP unit
For plugging a mono earphone 1/8mm TS connector into the beltpack, you will need: XLR 4-pin Female connector to 1/8" TS jack adaptor cable, see attached picture.
XLR 1/8” TS
Pin 1 = Microphone Ground (not in use)
Pin 2 = Microphone Hot (not in use)
Pin 3 = Headset Ground Shield on TS
Pin 4 = Headset Hot Tip on TS
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.