Wireless: I have a WBS-670 Base Station and a WTR-680 Beltpack. Can I pair this beltpack with this base station?
So long as the base station and the beltpack share the same frequencysplit and both are able to tune to the specific transmits and receive frequenciesthey will work. Keep in mind that the WTR-680 is a dual channel device so onlyone of the channels will work on it with the WBS-670 base.
Note: The standard frequency presets are slightly different so the base station and or beltpack will need to be setup using the custom frequency editable groups / channels, these usually start at group 25 and end at group 36.
Note: The standard frequency presets are slightly different so the base station and or beltpack will need to be setup using the custom frequency editable groups / channels, these usually start at group 25 and end at group 36.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.