Wireless: Why can't I register 15 beltpacs to my MB-100 base station?
Question: I bought a used DX-100 system and I'm registering some new beltpacs to the base station. I can only register 9 beltpacs before the base station refuses to register anymore beltpacs. What am I doing wrong?
Answer: You are correct in that the MB-100 base station is capable of registering up to 15 BP200/WH200 communicators in the base stations memory. The first time you operate the DX100 system, you must register each BP200 or WH200 to the base station for use with a specific base station.
The base station will then recognize all registered Beltpacs/ Headsets/Speaker Stations when their power is on, and will know the difference between them and other equipment operating on the same frequencies. If a Beltpac/Headset is added, replaced or repaired later the new must be registered but the old ones remain in memory. Since only 15 Beltpacs or Headsets can be in memory, whether currently in use or not, all memory must be cleared to remove any old Beltpac/Headset registrations.
So clear the memory on the base station to remove the beltpacs/Headsets no longer in use and then register the currently used beltpacs and headsets.
Answer: You are correct in that the MB-100 base station is capable of registering up to 15 BP200/WH200 communicators in the base stations memory. The first time you operate the DX100 system, you must register each BP200 or WH200 to the base station for use with a specific base station.
The base station will then recognize all registered Beltpacs/ Headsets/Speaker Stations when their power is on, and will know the difference between them and other equipment operating on the same frequencies. If a Beltpac/Headset is added, replaced or repaired later the new must be registered but the old ones remain in memory. Since only 15 Beltpacs or Headsets can be in memory, whether currently in use or not, all memory must be cleared to remove any old Beltpac/Headset registrations.
So clear the memory on the base station to remove the beltpacs/Headsets no longer in use and then register the currently used beltpacs and headsets.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.