Wireless: What are the WBS-670 and 680 headset XLR connector pin outs?
WBS-670 and 680 4-pin XLR Headset pin outs
The base station uses a male 4-pin XLR connector. A dynamic or electret headset microphone is automatically detected and supplies a bias voltage if required.
The beltpack headset XLR wiring is exactly the same as a wired RS-500 or RS-600 beltpack, so a Clear-Com wired headset can be used interchangeably with wired and wireless beltpacks.
The base station uses a male 4-pin XLR connector. A dynamic or electret headset microphone is automatically detected and supplies a bias voltage if required.
The beltpack headset XLR wiring is exactly the same as a wired RS-500 or RS-600 beltpack, so a Clear-Com wired headset can be used interchangeably with wired and wireless beltpacks.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.