Wireless: What is the Transmit RF output power on the WBS-680 base station?
The WBS-680 base station transmit RF output has two settings, a HIGH power setting that allows the two transmitters to operate at full power (approximately 100 milli-watts or +20dBm).
The NORMAL setting reduces the transmitted output power by 10db below full power (10 milli-watts or +10dBm).
The RF output can also be turned completely off by setting the On / Off slide switch to the Off position. This is desirable when linking two base stations together using the same wireless group / channels.
Rear panel transmit switches shown in the HIGH / ON position. This allows for maximum distance use with the WTR beltpacks.
The NORMAL setting reduces the transmitted output power by 10db below full power (10 milli-watts or +10dBm).
The RF output can also be turned completely off by setting the On / Off slide switch to the Off position. This is desirable when linking two base stations together using the same wireless group / channels.
Rear panel transmit switches shown in the HIGH / ON position. This allows for maximum distance use with the WTR beltpacks.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.