How to set the switches to select frequency that the PRC-2 receives
Here’s a useful website. It’sfor finding the correct screw-switch settings to select the correct frequencyfor a wireless IFB receiver. Select the frequency block on the revealedchart will show you the settings needed to receive the transmitter’s signal.
http://www.lectrosonics.com/Support/frequency-tables-switch-settings.html
There are two screw-switches on the PRC-2... one for course frequency and one for fine. The charts will show you how to select the proper selections.
http://www.lectrosonics.com/Support/frequency-tables-switch-settings.html
There are two screw-switches on the PRC-2... one for course frequency and one for fine. The charts will show you how to select the proper selections.
, multiple selections available,
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.