Wireless: Can I update the PD2203 splitter firmware via OTA or USB on a FS II base station system?
Question: I'm in the process of upgrading a CellCom base station system to Freepeak II system, I understand the system components are upgradeable via USB or Over The Air (OTA) methods. Does this include the PD2203 antenna splitter firmware?
Answer: The following components will upgrade using USB / OTA upgrade method:
The PD2203 splitter module is only upgradeable via serial port comms using Flash Delevopment Toolkit software.
Note: PD2203 splitters built prior to September 2014 will need a hardware upgrade in order to work properly with
Freespeak II Eclipse EHX 7.6 or higher systems and with Freespeak II base station systems. Please contact the
Clear-Com Service Department Group if you have questions.
Answer: The following components will upgrade using USB / OTA upgrade method:
- FS II beltpack
- FS II transceiver antenna
The PD2203 splitter module is only upgradeable via serial port comms using Flash Delevopment Toolkit software.
Note: PD2203 splitters built prior to September 2014 will need a hardware upgrade in order to work properly with
Freespeak II Eclipse EHX 7.6 or higher systems and with Freespeak II base station systems. Please contact the
Clear-Com Service Department Group if you have questions.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.