Wireless: Is the Tempest wireless intercom systems easy and intuitive to setup and use.
System setup is straight forward and typically requires less than 15 minutes to be up and running. Any end user that is familiar with existing 2-wire partly-line beltpack operation can be using a Tempest beltpack in just seconds.
Setting up a Tempest system is very easy a) Pair the beltpacks to the basestation (less than 5 seconds per beltpack) b) Select which mode each channel is going to be used for 2wire or 4wire modec) Connect your external system to the Tempest basestation d) Start using the system
In less than 15 minutes you are up and running
Setting up a Tempest system is very easy a) Pair the beltpacks to the basestation (less than 5 seconds per beltpack) b) Select which mode each channel is going to be used for 2wire or 4wire modec) Connect your external system to the Tempest basestation d) Start using the system
In less than 15 minutes you are up and running
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.