Wireless: Can I register more than 4 BPs to a DX300 base
I need a confirmation about registering 4 beltpacks on one base, andusing all 4 beltpacks: Is it just a matter of setting 2 beltpacks in latchoperation and the other 2 in non-latch mode so that only those two will work in"half-duplex" mode?
Youcan register up to 15 Bps on the DX300 base but only 3 can talk at the same time(see link to DX300manual)Youset each BP to talk on Channel X or Channel O or both channelsTheBP will listen to the channel it has been selected to talk on , so it works fullduplex on that channel
Yesyou can set the BP to be latching or non-latching operation
For DX-300 you get the added function of both relayand 4-wire operation
Youcan register up to 15 Bps on the DX300 base but only 3 can talk at the same time(see link to DX300manual)Youset each BP to talk on Channel X or Channel O or both channelsTheBP will listen to the channel it has been selected to talk on , so it works fullduplex on that channel
Yesyou can set the BP to be latching or non-latching operation
For DX-300 you get the added function of both relayand 4-wire operation
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.