Wireless: 4-wire pinouts incorrect in CellCom 10 version 1.5.7 manual
The Cellcom / Freespeak basestation 4-wire pinout drawing is incorrect in the CellCom 10 version 1.5.7 manual
The drawing on page 4-8, figure 4.2 is incorrect,
The correct pinout should be :the output pair are pins 3 and 6, input pair are pins 4 and 5 on the RJ45 4-wire jack drawing.
Pin Description 1 Not used 2 Not used 3 Audio Output + 4 Audio Input + 5 Audio Input - 6 Audio Output - 7 Not used 8 Not used
Solution update:this has been corrected in the CellCom version 2.0 manual
The drawing on page 4-8, figure 4.2 is incorrect,
The correct pinout should be :the output pair are pins 3 and 6, input pair are pins 4 and 5 on the RJ45 4-wire jack drawing.
Pin Description 1 Not used 2 Not used 3 Audio Output + 4 Audio Input + 5 Audio Input - 6 Audio Output - 7 Not used 8 Not used
Solution update:this has been corrected in the CellCom version 2.0 manual
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.