Wireless: CEL-BP RPN antenna conversion chart

The CellCom beltpack RPN antenna number starts at 6 and needs to be subtracted by 5 to get the corresponding active antenna number that is connected to the CellCom base station. 
Observing the beltpack RPN # is useful during site surveys to see if a beltpack is handing off between active antennas properly.  The chart below shows the RPN antenna numbers starting at 6 and ending at 15 and their conversion to the CEL-TA active antennas numbers starting at 1 and ending at 10.
The CellCom basestation support upto 10 antennas via 2 splitters each splitter supports 5 antennas If only 2 antennas are connected directly to the basestation , they will occupy antennas 1 and 6 in the table below. Antennas 1-5 and 6-10 are only shown when a splitter unit is connected to the basestation




















CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.