Wireless: I Can't change the Tempest Beltpack from Dynamic mic headset to Electrec mic headset?
Question:
1. Why does my local headset mic level of a Basestation always show "Dynamic" when a headset is plugged in? With no headset plugged in it always shows Electret mic ? How do I change it?
2. Why does my headset mic level of a Beltpack always show "Dynamic" when a headset is plugged in? With no headset plugged in it always shows Electret mic ? How to change it ?
Answer: The 4-pin XLR male headset connector mates with most Dynamic or Electret headsets that have 4-pin XLR female connectors. This Headset connector allows a user to communicate in “Dual-listen” or “Single-listen” mode on either intercom channel. The mic detect circuit (dynamic/electret) will indicate dynamic when it sees a load of 600Ω or less. It will indicate an
electret when it sees 1kΩ or greater. Between 600Ω and 1kΩ is not recommended as it may not accurately detect mic type.
These are simply default settings. The actual circuit will sense the correct mic type when connected to a headset. There is no need to change anything, this is normal operation. Also you cannot adjust the Mic level without a headset connected.
1. Why does my local headset mic level of a Basestation always show "Dynamic" when a headset is plugged in? With no headset plugged in it always shows Electret mic ? How do I change it?
2. Why does my headset mic level of a Beltpack always show "Dynamic" when a headset is plugged in? With no headset plugged in it always shows Electret mic ? How to change it ?
Answer: The 4-pin XLR male headset connector mates with most Dynamic or Electret headsets that have 4-pin XLR female connectors. This Headset connector allows a user to communicate in “Dual-listen” or “Single-listen” mode on either intercom channel. The mic detect circuit (dynamic/electret) will indicate dynamic when it sees a load of 600Ω or less. It will indicate an
electret when it sees 1kΩ or greater. Between 600Ω and 1kΩ is not recommended as it may not accurately detect mic type.
These are simply default settings. The actual circuit will sense the correct mic type when connected to a headset. There is no need to change anything, this is normal operation. Also you cannot adjust the Mic level without a headset connected.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.