Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

To do that please follow the instructions:
Connect COM port only locally on single device using simplex fiber cable - this will create internal loopback for all video channels and channel 1 will appear on output 5, channel 2 on output 6 and so on. Please do the same for each device. This will allow us to see which device has a problem and if it's a problem with transmitter or receiver. Only loopback the Com 1 port as shown in the panel diagram below. 










  • No labels

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.