Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

A simple example of using a control as an IFB source pre-selector

This example is how to pre-select and audio source to a port output, then using the IFB function the source is dimmed or cut when a panel talks to the port output. In this example the Audio panel has a key to pre select a programme input to the studio floor loudspeaker output (LSTB). When the Audio panel talks to the LSTB the selected Prog feed is dimmed by 6dB.

 

First create an IFB with LSTB as the IFB destination, Prog as the source. The -6dB attenuation should give a 50% reduction when the IFB is actioned.

Next in the Routes menu create an IFB route with Prog as the source, LSTB as the destination.

In the Control menu assign the above route to a control.

On the panel assign the control to a talk key.

Final step, on the panel, assign a talk key to the LSTB IFB

 

 

 

 

  • No labels

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.