Wireless: How do I know if a FSII (E1) antenna / transceiver is receiving dect sync?
The FSII (E1) Antenna uses all 8 wires of the CAT5 cable on an E1 pin out when wired back to a splitter, base station or directly to an E-Que card.
Pin 1 TX Tip +ve
Pin 2 TX Ring –ve
Pin 3 DECT Sync +ve (For Cellcom/ FreeSpeak connection to Antennae)
Pin 4 RX Tip +ve
Pin 5 RX Ring –ve
Pin 6 DECT Sync –ve
Pin 7 GND
Pin 8 +12V (From base or splitter – No power from E-Que rear)
PLEASE ENSURE WIRING INTEGRITY:
There is a chance that the CAT5 cabling/ patching could be wired wrongly, leading to a bad connection.
LED STATUS INFO:
The Yellow LED on the antenna will be off if there is no E1 TX/RX signals.
If the yellow LED is giving a double blink, the antenna is in demo/ site survey mode.
If there is no power from the base station/ splitter/ E-Que card then the Green or Blue status LED will be off.
If the DECT sync wires (pin 3,6) are missing, the EHX & FSII-Base-II antenna diagnostic screen will now report that an Antenna has failed to sync with the DECT clock from the E-Que card/ base station and is instead using its own internal clock.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.