Page Comparison

PINOUT: FreeSpeak II Base II - Kenwood Walkie Talkie 2 Pin to 5 Pin K Cable Connector to RJ45 and DB-15 Connector

1. Log into the your FreeSpeak II Base II CCM

2. Default login credentials: ID: admin / PW: admin

...

Assignment Setting:

1. Navigate to “Assignment” tab

2. Select the desire “Channel” (e.g Channel 1)

3. Select and add “+” the “4W-Port” connected to the walkie talkie

...

4-Wire Port Setting:

1. Navigate to “Device” tab

2. Select “Ports”

3. Select the “4W-Port” connected with to the walkie talkie

4. Select “Port Function” - ‘to matrixTo Matrix”

GPIO Setting:

1. Navigate to “Device” tab

2. Select “General”

3. Select “GPO1” 

4. Select “Source” to the channel assigned “Destination” to the walkie talkie (e.g Channel 1)

5. Select “+” to create new “GPO” (Control Events)

   1. Source= Channel assigned to the walkie talkie (e.g Channel 1)

   2. Destination = 4W-Port connected to the walkie talkie (e.g 4W-Port 1)

   3. Action Type = Call (4W-Port 1 receive call) - Press “Talk” on FSII Base Channel 1 to send audio to the Walkie Talkie.

...