1) Create a port forwarding rule within the firewall that port forwards allAgentall Agent-IC TCP/UDP traffic received to the LQ behind the firewall.                 

Example 1: Port forward all traffic received on port 6300:TCP/UDP to an LQ behindthe behind the firewall having a network address of 192.168.1.50 

   Example 1
           Example 1Image Removed
       

...

2) Within the CCM (browser-based management interface) hosted by the LQ, navigateto:
 Device > Network 3)  Withinthe navigate to:  Device > Network

3)  Within the External Connectivity section, enter the external IP address and port asconfigured as configured within the port forwarding rule on your router/firewall.

      EXAMPLE 2  
 Image Removed

...

4) Recreate the certificate (LQ v4.0 and below)
     To force the re-creation of the certificate, you can: a 

a)   Reboot the devicebdevice

b)   Change the local IP address 5address 

5)  Create Agent-IC User account Accounts> Agent-IC               Create IC Create a new account 6account 

6) Within the Agent-IC client application, navigateto navigate to the settings screen and enter the following connection information: 

• User – [username entered in step #5 above]

• Password - [password entered in step #5 above]

• LQ Server – [your firewall external address as configured in step #3] (22.192.175.132 in this example)

• LQ port – [your external facing port as configured in step #3] (6300 in this example)

 7) Done Your Your agent-IC client should now have connectivity to the LQhost LQ host from both inside and outside the facility.For Above pix See attached

FOR ADDITIONAL INFORMATION ABOUT CONNECTING LQ OR ECLIPSE TO THE INTERNET, VISIT THIS SOLUTION

...

Additional Attachments.