...
Pin 8 +12V (From base or splitter – No power from E-Que rear)
PLEASE ENSURE WIRING INTEGRITY:
There is a chance that the CAT5 cabling/ patching could be wired wrongly, leading to a bad connection.
...
LED STATUS INFO:
The Yellow LED on the antenna will be off if there is no E1 TX/RX signals.
...
If there is no power from the base station/ splitter/ E-Que card then the Green or Blue status LED will be off.
If the DECT sync wires (pin 3,6) are missing, the EHX & FSII-Base-Base2 II antenna diagnostic screen will nowreport if now report that an Antenna has failed to Sync sync with the DECT clock from the EQue E-Que card/ basestationand base station and is instead using its own internal clock.