When upgrading E-IPA cards please allow 10-15mins to complete

Owned by ernie addow
Last updated: Dec 01, 2020 by Jason Fernandes
1 min read

When upgrading a E-IPA cards please
Be aware that it takes about 10-15min per card  & the card may re-boot several times before it completes the upgrade, so you should wait the 15mins for the upgrade to complete

 

The upgrade can take upto 10 -15mins: During the upgrade process the card may reboot several times and not show any indication on its display that the upgrade is still taking place.

Failure to allow the full 10mins may result in the E-IPA FPGA upgrade not completing and making the card inoperable.

In some versions you will see the error: “Upgrade unsuccessful”. It fact, the upgrade is still being processed. Please do not interupt.

Please be patient and allow upto 10-15 mins for the E-IPA software upgrade to totally complete.

Please wait for the E-IPA card OK leds to start flashing normally before using the card.

 

If you want to upgrade both banks of a E-IPA card / IPT or Iris panel;

Use the EHX central upgrade method to update bank #1

Then use CCM to upgrade method to update bank #2

For HX V12 upgrades it is recommended that you upgrade both banks of the E-IPA card.

  • It is not necessary to do this for IPT or Iris, only E-IPA

 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.