Flasher Logic for EHX

By John Ferrante
1 min

The attached logic will toggle a matrix relay on and off about once a second. This is useful for flashing an On-Air or similar warning light.

 

Set the control input to on to start flashing, off to stop. The control output can be any relay.

A coarse time adjustment can be made by adding or subtracting flip flops, and a fine adjustment

can be made by adding or subtracting the nor gates.

 

 

Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.