Solution Finder

Apps

Workflow Report

Space shortcuts

Clear-Com Main Website Contact Clear-Com How-to articles Troubleshooting articles

Agent-IC & Station-IC Solutions

AoIP (Audio over IP) - Requirements, Recommendations and Solutions

AES67 Requirements and Recommendations

Dante Requirements and Recommendations

HelixNet Requirements and Recommendations

Connecting Over the Internet, Firewall Port Requirements and Other Misc. Information

Port mirroring on a Cisco Network Switch with SPAN/RSPAN

How to listen to SIP audio RTP Streams using Wireshark and Audacity

How to listen to AES67 / ST2110 audio RTP Stream using Wireshark and Audacity

Solution Finder - How to connect a V-Iris Panel via a pre-configured Static IP for AES67.

How to Interpret the SMPTE2110 SDP File Generated by EHX

mchammer - multicast stream group subscription

Network Switches That DO and DO NOT Work with Clear-Com AES67 / ST2110-30 Equipment

What 3rd party ST2110 equipment works with Clear-Com

Listen to ST2110 streams using VLC media play

Does the E-IPA card support SSM (Source Specific Multicast)

Cisco Systems PTP white paper (June 2020)

Arista Systems: PTP Best Practices for Media and Entertainment and Broadcast Centers (June 2020)

Using Dante DDM Clocking Zones and AES67 over WAN

How many PTP clients can the E-IPA service when acting as a GM (Grand Master)

Lawo: PTP overview setup and guide

Cisco Systems : Transition to a IP Broadcast facility (white paper 2018)

What PTP values do I need to get good RF roaming between IPT antennas (#2)

Basic guide on setting up Cisco, Luminex, Artel Quarra Ethernet switches (from Ravenna)

Port and VLAN Mirroring on CISCO SG300/200 switcher

Artel Quarra 1G PTP switch setup for AES67

Changing (Dante) DSCP QoS on a Cisco SG350

Cisco Catalyst Broadcast Storm

Clear-Com: Best practice when connecting two Ethernet switches when using Clear-Com IPT / ST2110 (AES67) systems

Cisco SG350 potential EEE configuration bug causing "pop" noises on FSII beltpacks (unconfirmed)

Matrix: Clear-Com AES67 Switch Recommendations and Configuration

Proper Network Designs and Considerations for SMPTE ST-2110

Can I connect E-IPA to SSM devices

Cisco systems: Cisco IP Fabric for Media Design Guide

Clear-Com ST2110 / AES67 System Network Guide

Using Lawo Virtual Patch Bay to Listen to AES67 Streams

Clear-Com: Network Considerations for Routing Clear-Com AES67 Streams across Layer 3

Basic principles of Clear-Com products use of PTP / AES

How are ST2110-30 audio streams defined in EHX

Huawei CE8850 switch

EHX Error message:TIME OUT-BACH respones is slow

Cisco Catalyst 3850 switches

Cisco SG350 switch setup for Clear-Com AES67/ ST2110-30 networks

Artel Quarra 1G / 10G AES67 PTP Setup Guide (Transparent Clock)

Artel Quarra 1G / 10G AES67 PTP Setup Guide (Boundary Clock)

How are the ST2110 audio streams defined on the E-IPA card

How do I set up a Time Machines TM2000A as a Grand Master?

IP Networks: Spine leaf topology and where/ when to use Boundary clocks vs Transparent clocks

PTP and the Mentor RG

What is the bandwidth usage for AES67 devices connected to an E-IPA card?

What is the protocol PTP profile to be used to synchronize the IPT to IPA for EHX v11 and EHX v12 and what are the differences?

Clear-Com: Recommended E-IPA Card Configuration Options

Clear-Com: E-IPA TO IPT / IRIS PANEL BASIC LAYER 3 ROUTING

How much bandwidth do IPT and Iris panels in AES67 mode

What is a Spine-Leaf network

Dante (white paper) : Domain Manager for AES67 networks (2019)

Where in the AES67 network should I place the Grandmaster clock (leader)

Embrionix : Basics of PTP (and Boundary / Transparent clocks)

Yamaha: Connecting Dante devices with other AES67 devices

Do Clear-Com IPT transceivers work with PTP Sync interval of -2 setting

General IP network guide for FreeSpeak Edge Base Station and Arcadia

Subnets not to be used with IPA or Iris panels

Cisco: How to disable PoE (Power over Ethernet) mode on 9300 catalyst devices

Streaming audio to/from a Dante device via AES67

AES-67 sounds thin and has high pitched noise on E-Dante

Suggested Network Switches and Internet Connectivity

Minimal Clear-Com Port Requirements

Trilogy Mercury - Multicast to Algo Speakers

Gateway CG-X1-MIP1 - default IP address

How to use Wireshark for long duration captures

Broaman & ProGrid Solutions

Encore Partyline Solutions

Headset Solutions

HelixNet Solutions

How-to articles

Matrix: Eclipse EHX and ECS Solutions

Misc. Solutions

Service and Support Questions

Telephone Interfacing Solutions for Intercom

Troubleshooting articles

Various Clear-Com Calculators

Wireless Solutions (FSII/DX/Edge/Equip)

Clear-Com Knowledge centre

Sanitizing Clear-Com Equipment

Bringing Your Equipment Back Online After a Long Period of Disuse

How do I change profile in Station IC?

Clear-Com products and their IT requirements

Converting the FOR-22 call signal / logic input into a Control for use within EHX

CCM Access: Some companies are not allowing CCM access

Importing an ECS 4.2 configuration into ECS 5.4.x

Solution Finder
AoIP (Audio over IP) - Requirements, Recommendations and Solutions
AoIP Solutions

restrictions.empty

Artel Quarra 1G PTP switch setup for AES67

Created by ernie addow

Last updated: Dec 03, 2020 by Ibi Ali

Generic AES67 setup for Artel Quarra 1G PTP switch. The attached setup is from Artel tech support

{"serverDuration": 26, "requestCorrelationId": "15ef747203c92eea"}