Lost Party-line and IFB set-ups in Dynam-EC with NID

1 min

I have lost my Partyline and IFB set-ups in Dynam-EC with NID map download to the Matrix? 

 If you have lost the Partyline and IFB set-ups in Dynam-EC with NID map download to the Matrix.

Check the battery level of the CPU on-board, which should be nominally at least 2.8v.

Replaced the battery.

The minimum at which the data may remain intact is around 2.5V but normally the battery should be replaced before the voltage drops to this level.

 

 

 

 

 

 

 

 

 

 

 

 

 



If you have lost the Partyline and IFB set-ups in the Dynam-EC with NID map download to the Matrix.       Check the battery level of the CPU on-board, which should be nominally at least 2.8v.

Replaced the battery.

The minimum at which the data may remain intact is around 1.5V but normally the battery should be replaced before the voltage drops to this level.

 

Looking for labels? They can now be found in the details panel on the floating action bar.

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.