Eclipse DB25 GPO Pin-Out
How to Configure EHX for Two-Way Radio Interface through DB25
In EHX, configure an empty port as a Direct (you’ll probably want to avoid the last four ports as we might need VOX gating later), give it a decent talk label.
Go to Control Manager, create a new control (I name them * + radio name, but whatever works) and attach (click from left to right) Frame Relay 1 (or whichever relay you used).
Go back to Matrix Hardware and select the new Direct port. Under Secondary Action, use the drop-down to select the control you just made.
This will mean that any time the port key is pressed, the relay will trigger to tell the handset to transmit.
Go to Panel Programming and add the key; you’ll want a listen key to monitor and a talk key to transmit.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.