/
Cisco SG350 switch setup for Clear-Com AES67/ ST2110-30 networks
Cisco SG350 switch setup for Clear-Com AES67/ ST2110-30 networks
The attached file details steps on how to configure a SG350 for Clear-Com only AES67/ ST2110 networks
QoS (DiffServ), VLANS, IGMP, PTP
Related content
AES67 Requirements and Recommendations
AES67 Requirements and Recommendations
More like this
Basic principles of Clear-Com products use of PTP / AES
Basic principles of Clear-Com products use of PTP / AES
More like this
Basic guide on setting up Cisco, Luminex, Artel Quarra Ethernet switches (from Ravenna)
Basic guide on setting up Cisco, Luminex, Artel Quarra Ethernet switches (from Ravenna)
Read with this
Network Switches That DO and DO NOT Work with Clear-Com AES67 / ST2110-30 Equipment
Network Switches That DO and DO NOT Work with Clear-Com AES67 / ST2110-30 Equipment
More like this
Clear-Com: Network Considerations for Routing Clear-Com AES67 Streams across Layer 3
Clear-Com: Network Considerations for Routing Clear-Com AES67 Streams across Layer 3
Read with this
Matrix: New Install - Network Requirements for AES67 Audio
Matrix: New Install - Network Requirements for AES67 Audio
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.