Matrix: how do I get realtime monitoring of Matrix GPI and GPO + Controls,
My customer has a complex set of Logic Maestro functions that switches on various GPIO using isolates and XNOR gates (as configured through "controls" on the Logic Maestro pages) I just would like to monitor what's happening.
Answer :
a) you can view the LED status on the front of the GPI-6 and RLY-6 cards to tell you if a control is active
b) Using the simulation button in the Logic Maestro you can step through your logic diangrma to see if the outcomes are correct
c) Using a normal HX-control you troubleshoot your logic diagram by configuring the control it to turn on a LED on a panel and or fire a relay , at each stage of the logic to see if the logic is working correctly
d) Using a custom command in the EHX > diagnostic > Event log
you can enable real time status monitoring of Controls
the event log will show the on/off status of the card/pin associated with your control
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.