/
What AES67 timing requirements are needed for V-Iris panels

What AES67 timing requirements are needed for V-Iris panels

Owned by ernie addow
Last updated: May 09, 2023
2 min read

Question : Do i need to use the same timing for IP antennas and V-Iris panels running over a AES67 network

 

Solution

  • IP Antennas have a very small synchronization tolerance. The PTP delay timing (OFM) must be within ± 1us

  • V-Iris panels do not have such a small tolerance on the PTP (OFM) timing. The main rule for V-Iris is that the overall packet travel time must be less than 2ms or you will have no audio (same is true for IPT )

If you are running both IPT and V-Iris panels over the same AES67 network then you should meet the stricter requirements for IPT antennas

If you are running ONLY V-Iris panels over a AES67 network then the main rule is that the overall packet travel time must be less than 2ms or you will have no audio (same is true for IPT )



IPT timing

 

V-Iris Timing

 

 

Visit the Clear-Com website for the latest version of the AES67 switch recommendations document : AoIP Network Recommendations

 







Related content

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.