Partyline: what is the difference between the IC.xx-6P and the IC.xx-2P cable
IC-xx-2P has 2-pairs of wire which when used with RS-602/622 supply conductors for ground, 30V, ch 1, ch 2. There are no connections for pins 5 & 6 on the connectors.
IC-xx-6P has 4-pairs of wire which when used with the PIC04704 will supply conductors Each pair has two conductors and a shield. All shields are common to pin1 ground; one wire from each pair is common to pin2, +30V; the other remaining wire is for each of the 4 signals and connected to pins 3, 4, 5, 6.
each cable is avialable in 25ft / 50ft / 100ft (7.6m/ 15.2m/ 30.4m) lengths
IC-xx-6P has 4-pairs of wire which when used with the PIC04704 will supply conductors Each pair has two conductors and a shield. All shields are common to pin1 ground; one wire from each pair is common to pin2, +30V; the other remaining wire is for each of the 4 signals and connected to pins 3, 4, 5, 6.
each cable is avialable in 25ft / 50ft / 100ft (7.6m/ 15.2m/ 30.4m) lengths
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.