Matrix. Vseries panel is working normally but it will not take an Ethernet upgrade?
Vseries panel is working normally but it will not take an Ethernet upgrade?
Open the map in ECS, select the Matrix Hardware, Highlight the selected the panel port, go to the Advanced Settings, Select the Soft Mode Options,SET the Diagnostic Menu Access to be True.
Download the map to the Matrix, after the download, Press the Panel Menu button, select Diagnostic and the select RESET the panel.
After that try the panel upgrade using the TFTP server and a Ethernet crossover panel.
Open the map in ECS, select the Matrix Hardware, Highlight the selected the panel port, go to the Advanced Settings, Select the Soft Mode Options,SET the Diagnostic Menu Access to be True.
Download the map to the Matrix, after the download, Press the Panel Menu button, select Diagnostic and the select RESET the panel.
After that try the panel upgrade using the TFTP server and a Ethernet crossover panel.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.