Matrix GPI For Port Mute
Matrix GPI For Port Mute
Question: Is itpossible to mute an output port by activation of a GPI on the Median HX matrix? I amlooking for an easy way to mute the studio speakers (for when using studiopaging fed through the intercom matrix with PGM+Talkback). Lookingthrough the EHX Software User Guide I could only find logic input options forthe GPIs on panels, not on the frame.
Answer: Yes. Steps:1) Program Feed PORT named PGM in thisexample with Forced Listen under Local Advanced
2) Create an inhibit talk Route for PGM.
3) Create a Control label MUTE PGM (can be any label that’s relevant) andattached route to assigned the Control
4) Go to GPI 1 and attached Control “Mute PGM"
5) Apply changes to Matrix withreset.
Please refer to attached document.
Answer: Yes. Steps:1) Program Feed PORT named PGM in thisexample with Forced Listen under Local Advanced
2) Create an inhibit talk Route for PGM.
3) Create a Control label MUTE PGM (can be any label that’s relevant) andattached route to assigned the Control
4) Go to GPI 1 and attached Control “Mute PGM"
5) Apply changes to Matrix withreset.
Please refer to attached document.
Related content
Matrix: Can we split the usage of some of the ports so that the talk and listen functions were not associated? One example could be clean feed (mix minus) from sound desk going in to the matrix but the outgoing part of the port would feed a local speaker
Matrix: Can we split the usage of some of the ports so that the talk and listen functions were not associated? One example could be clean feed (mix minus) from sound desk going in to the matrix but the outgoing part of the port would feed a local speaker
More like this
Matrix: IFB audio, can I switch the PGM via GPI or panel key
Matrix: IFB audio, can I switch the PGM via GPI or panel key
More like this
Matrix: Can I use a matrix GPI to flash a LED on a panel
Matrix: Can I use a matrix GPI to flash a LED on a panel
More like this
Matrix: Is it possible to use the panel GPI inputs to make crosspoints unrelated to the panel
Matrix: Is it possible to use the panel GPI inputs to make crosspoints unrelated to the panel
More like this
Matrix: Two sources triggering the same matrix control
Matrix: Two sources triggering the same matrix control
More like this
Matrix: How do I create a global IFB? NOTE: this is for ECS matrix and not EHX newer than 8.5
Matrix: How do I create a global IFB? NOTE: this is for ECS matrix and not EHX newer than 8.5
More like this
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.