Helixnet: HLI-4W2 4-wire interface module information / pin outs

The HLI-4W2 (4wire module) interface module allows the user to interface into a digital matrix 4-wire system such as Clear-Com / Matrix+3 / Drake / RTS / Reidel. 
The Helixnet 4wire module interface module pin outs are pin for pin compatible with an Eclipse  / Matrix +3 MVX analog ports. The Helixnet 4wire module is wired the same as Eclipse panel / IMF-3 interface (i.e FOR-22) - to allow the user to use a straight CAT5 cable between the Helixnet unit and the Eclipse / Matrix+3 / Drake matrix systems
The HLI-4W2 interface module RJ45 port is compatible with standard CAT-5 / 6 T568B standard cables.
Note:  If the user is interfacing into an Eclipse matrix. Set the port type to be either "CCI-22" or Helixnet in order to take advantage of call signalling. 

















CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT


This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.