/
BIOS Settings for VoICE 2 after CMOS failure

BIOS Settings for VoICE 2 after CMOS failure

Apr 06, 2019

If the CR2032 battery on your VoICE 2 fails, it will lose the BIOS settings.
This will cause the unit to fail to boot, as it should be set to look for IDE 1, not the default IDE 0.
Here are the default settings - be sure to watch for the boot to go through to the login prompt, as failure to do so (usually with a 'fuzzy' screen) indicates a memory or more likely memory bridge failure.
Connect a VGA Monitor and PS/2 or USB Keyboard - you will need to open the VoICE case and gently bring the motherboard out enough to plug in the VGA cable. 

CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT

This solution was provided by Clear-Com via a question submitted to us by customers like you. If you wish to share with us a new solution or update an old one, please follow this link..

The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.