Upgrade of PD4224 Drake panel to Eclipse
Follow these steps in order to make the PD4224 panel compatible with Eclipse,
1. You need to get the isolation card and new eprom from Clearcom. Part number: -4224/15/26PNL-UG2. Follow the steps on the 4000 installation guide to install the new isolation card card and eprom3. On the panel, you need to adjust the following jumper links: Link 11, jumper links need to be in positions 1, 2 and 4 A17 needs to be positioned towards the back of the panel A18 needs to be positioned towards the front of the panel4. Download the panel firmware for the 4224 panel to the Eclipse matrix5. Connect the panel to the Eclipse matrix or power cycle the unit if it was previously connected.
1. You need to get the isolation card and new eprom from Clearcom. Part number: -4224/15/26PNL-UG2. Follow the steps on the 4000 installation guide to install the new isolation card card and eprom3. On the panel, you need to adjust the following jumper links: Link 11, jumper links need to be in positions 1, 2 and 4 A17 needs to be positioned towards the back of the panel A18 needs to be positioned towards the front of the panel4. Download the panel firmware for the 4224 panel to the Eclipse matrix5. Connect the panel to the Eclipse matrix or power cycle the unit if it was previously connected.
CAN'T FIND YOUR ANSWER? CLICK HERE TO CONTACT SUPPORT
This solution was provided to you by Clear-Com via a question submitted to us by customers like you. If your question wasn’t answered, you need help or you have a recommended solution for our database, please send us an email at support@clearcom.com
The information on this page is owned by Clear-Com and constitutes Clear-Com’s confidential and proprietary information, may be used solely for purposes related to the furtherance of Clear-Com’ business and shall not be disclosed, distributed, copied or disseminated without Clear-Com’s prior written consent. Click Here for Clear-Com's privacy statement.